Artemis vs LumyHealth comes down to budget, neck coverage and FDA status. The Renpho Artemis costs $159.99 and its model is listed in an FDA clearance, while the LumyHealth 4D costs $299 and adds a separate neck mask and more light modes, as of October 19, 2026. Most first-time buyers will get more value from the Artemis. Pick the LumyHealth 4D if your jawline and neck matter as much as your face.
We did not wear or test either mask. We read the FDA clearance file and owner's manual for the Artemis, searched the FDA databases for the LumyHealth 4D, read both brands' product, warranty and return pages, checked published LED studies, and counted owner reviews on each brand's site, then compared them side by side.
Choose the Renpho Artemis if you want a lower price ($159.99), shorter 10-minute sessions, eye cups and a model listed in FDA clearance K243555. Choose the LumyHealth 4D ($299) if you want face and neck masks in one set, nine light modes and a wireless remote. Both are comfortable, soft silicone masks.
We earn a commission if you buy through these buttons, at no extra cost to you.
See today's price at Renpho See today's price at LumyHealth

How do the Renpho Artemis and LumyHealth 4D compare on specs?
Both masks are flexible silicone, both run on a 2000 mAh battery, and both pair red light with 850 nm near-infrared. The differences are in coverage, the number of light modes, the controls and the paperwork. The table shows each mask as sold on its brand's US store.
| Renpho Artemis | LumyHealth 4D Face & Neck | |
|---|---|---|
| Light | ||
| Light modes | 3 | 9 |
| Wavelengths | Red 630, near-infrared 850, blue 415 nm | Red 620-630, blue 440-465, green 520-525, yellow 590, near-infrared 850, infrared 1072 nm, plus purple, cyan and white mixes |
| LED count | 324 diodes (Renpho page); 108 LEDs (manual) | Not listed |
| Brightness | 5 levels | Adjustable on the remote, plus a pulse mode |
| Build and use | ||
| Coverage | Face, including the chin | Face plus a separate neck mask |
| Controls | Handheld controller on a cable | Wireless remote; neck piece cables to the face mask |
| Eye protection | 2 removable eye cups | None listed in the box |
| Weight | Mask about 210 g, controller about 102 g | 365 g |
| Battery | 2000 mAh, over 45 min per charge | 2000 mAh, run time not listed |
| Charge time | 2.5 h (Renpho page); 3-4 h (manual) | 2-3 h |
| Session (brand advice) | 10 min, 3-4 times a week | 15-20 min, 3-5 times a week |
| Weekly time | 30-40 min | 45-100 min |
| Buying | ||
| Price | $159.99 | $299 |
| FDA 510(k) | ✓ K243555 (model E100B) | ✗ None found; ask Lumyhealth |
| Warranty | 18 months (US and Canada) | 1 year |
| Returns | 30 days from delivery, no restocking fee | 60 days from purchase, 10-20% restocking fee |
| Free US shipping | Orders over $29.99 | Orders of $98 or more |
| HSA/FSA | Marked eligible on Renpho's page | Yes, through Truemed |
| Owner rating on brand site | 4.4/5 from 5,194 | 4.8/5 from 70 |
Prices are from Renpho's and Lumyhealth's US stores on October 19, 2026, before any coupon. Weekly time is our math from each brand's suggested routine. Two Renpho sources give different Artemis LED counts: the product page says 324 light diodes and the E100B manual says 108 LEDs. We show both because each source groups the diodes its own way.
Renpho Artemis
- Best for
- A first LED face mask on a budget
- Price
- $159.99 at Renpho
- Light
- Red, near-infrared and blue, 3 modes
- Coverage
- Face and chin
- Session
- 10 minutes, 3-4 times a week
- FDA
- Model E100B listed in K243555 (2025)
- Warranty
- 18 months
- Returns
- 30 days; unused for a change of mind
LumyHealth 4D Face & Neck
- Best for
- Face and neck sessions under $300
- Price
- $299 at LumyHealth
- Light
- Nine modes, including 850 and 1072 nm infrared
- Coverage
- Face plus a separate neck mask
- Session
- 15-20 minutes, 3-5 times a week
- FDA
- No 510(k) found; Lumyhealth says FDA-registered
- Warranty
- 1 year, with a 25% trade-in discount after
- Returns
- 60 days; 10% fee unopened, 20% opened
We earn a commission if you buy through these buttons, at no extra cost to you.
See today's price at Renpho See today's price at LumyHealth
Which LED mask wins each category?
Here is how the Renpho Artemis and the LumyHealth 4D line up, one buying factor at a time. Each mask takes several rounds.
Price: Renpho Artemis
The Renpho Artemis costs $159.99, about $139 less than the $299 LumyHealth 4D. Over the first year, that works out to about $13 a month for the Artemis and about $25 a month for the LumyHealth 4D. The LumyHealth price includes a neck mask, which is the main thing the extra money buys.
Light modes and wavelengths: LumyHealth 4D
The LumyHealth 4D has nine modes: red, blue, green, yellow, near-infrared at 850 nm, infrared at 1072 nm, and purple, cyan and white mixes. The Renpho Artemis keeps it to three: red with near-infrared (630 plus 850 nm), blue at 415 nm, and all three together. If you like to switch colors, the LumyHealth 4D gives you more to try. If you mainly want red and near-infrared for fine lines, both masks cover it.
Coverage: LumyHealth 4D
The LumyHealth 4D comes as two pieces: a face mask and a neck mask that wraps under the jaw. The Renpho Artemis covers the face down to the chin but stops there. If the skin on your neck is part of your goal, the LumyHealth 4D is the simpler choice.
FDA status: Renpho Artemis
The Renpho Artemis carries model number E100B, which is listed in FDA 510(k) K243555. We found no 510(k) for the LumyHealth 4D. The FDA section below explains what each brand's wording means.
Session time: Renpho Artemis
Renpho suggests 10 minutes, 3 to 4 times a week, or 30 to 40 minutes a week. Lumyhealth suggests 15 to 20 minutes, 3 to 5 times a week, which comes to 45 to 100 minutes. The Artemis is the easier routine to keep up, and the LED trials below relied on regular sessions over several weeks.
Controls and comfort: a tie
Both masks are soft silicone, and owners of both praise the comfort. The LumyHealth 4D runs from a wireless remote, though its neck piece connects to the face mask by a short cable. The Renpho Artemis plugs into a handheld controller with a screen and three buttons, so you keep the controller in your hand or nearby. The Artemis comes with two removable eye cups; the LumyHealth 4D box list does not include eye shields.
Warranty and returns: split
Renpho gives US and Canadian buyers an 18-month warranty, against one year from Lumyhealth. Renpho's return window is 30 days from delivery with no restocking fee, but a change-of-mind return must be unused and you pay return shipping. Lumyhealth gives you 60 days from purchase and accepts opened masks, but charges a 10% restocking fee if unopened ($29.90) or 20% if opened ($59.80), plus return shipping.
If you are unsure about LED masks, the LumyHealth 4D lets you send back a used mask for a fee, while the Artemis does not. The Artemis costs less to keep, though. Lumyhealth is a younger brand: its current UK company was set up on May 20, 2026, an earlier company with the same name ran from November 2024 to May 2026, and the lumyhealth.com domain dates from November 2024.
Are the Renpho Artemis and LumyHealth 4D FDA cleared?
The Renpho Artemis is, through its model number. The LumyHealth 4D has no clearance we could find. A clearance means the FDA judged a device substantially equivalent to one already on the market. That is a different pathway from FDA approval.
- Renpho Artemis: the US Artemis is model E100B, made by Shenzhen Eyco Technology. FDA 510(k) K243555, decided February 5, 2025, lists E100B among ten Eyco masks for over-the-counter use. Its red plus infrared mode is cleared for full-face wrinkles, and its blue and mixed modes for mild to moderate inflammatory acne.
- LumyHealth 4D: our October 19, 2026 searches of FDA 510(k) records and FDA registration and listing records turned up nothing under Lumy or LumyHealth. Lumyhealth's product page calls the mask FDA-registered.
Registration and clearance are two different things. Under FDA device registration, a company that makes or imports a device lists its site and products with the agency. A 510(k) clearance is a separate review of the device itself. Because a factory or importer usually files the registration, the brand name on the box may not show up. To settle the question, ask Lumyhealth which registration and which 510(k), if any, apply to the 4D.
The K243555 summary for the Artemis lists electrical, eye-safety and skin-contact testing, and says clinical testing was not needed. So the clearance speaks to safety and equivalence, not to how well the mask works.
Do the Renpho Artemis and LumyHealth 4D masks work?
We found no published study of either mask itself, so research on the same kinds of light is the best guide. That research is most encouraging for red plus near-infrared light on fine lines, which both masks offer.
A 2025 sham-controlled, double-blind trial gave 60 adults a home mask pairing 630 nm red light with 850 nm near-infrared, for 9 minutes, 5 days a week. From week 8, their crow's feet scored better than the sham group's. The mask maker funded that study. The Renpho Artemis uses the same 630 plus 850 nm pair, and the LumyHealth 4D uses 620 to 630 nm red with 850 nm. Neither is the trial mask, so results may differ.
The LumyHealth 4D also has a 1072 nm infrared mode. Evidence for that wavelength is thinner. One small 2007 trial with a placebo group applied 1072 nm light around the eyes daily for 6 to 8 weeks, and 52% to 57% of people rated their fine lines as better.
Acne research gives a split answer. Blue light on its own did not clearly cut breakouts in a 2019 analysis of 14 trials, while a 2023 analysis of 31 studies found benefits when red and blue light were combined. The Artemis mixed mode and the LumyHealth purple mode both combine red and blue. We found little research on home masks for the LumyHealth green, yellow, cyan and white settings, so count them as a bonus.
The Artemis manual lists its output: 6 to 8 mW/cm² in the red and near-infrared mode across its five levels. We found no output figure for the LumyHealth 4D that we could check against a manual or FDA file, so we do not compare brightness. Whichever mask you choose, give it 8 to 12 weeks of steady sessions before you judge it.

What do owners say about the Renpho Artemis and LumyHealth 4D?
On Renpho's site, the Artemis averages 4.4 out of 5 from 5,194 ratings, and 93% of reviewers recommend it. On Lumyhealth's site, the LumyHealth 4D averages 4.8 out of 5 from 70 reviews. The Artemis has a far larger pool of reviews to read.
- Renpho Artemis: verified owners describe the silicone as soft and flexible, and like reading or moving around during a session. Several say the timer helps them stay consistent. Some turned the brightness down after finding it strong at first, and three had seen little change at about one month.
- LumyHealth 4D: owners praise the comfort, the remote, the timer and the range of colors. Three bring up fit, such as a mask that feels big on a smaller face or a neck piece that sits against the chin. Eight say their order arrived quickly.
Our full Renpho Artemis LED mask review and LumyHealth LED mask review go through each mask in more detail, including how to use it.

Should you choose the Renpho Artemis or the LumyHealth 4D?
- want your first LED face mask for under $200 ($159.99)
- want a model listed in an FDA clearance for wrinkles and mild to moderate acne
- prefer short 10-minute sessions, 3 to 4 times a week
- like having eye cups and an 18-month warranty
- want light on your jawline and neck in the same set
- like switching between nine modes, including 1072 nm infrared
- prefer a wireless remote to a controller on a cable
- want a 60-day window and can accept a 10% to 20% fee to return it
Check with a doctor or dermatologist before using either mask if you are pregnant or breastfeeding, take medicine that makes your skin more sensitive to light (some antibiotics and retinoids do), have epilepsy triggered by light, or have an eye condition. Renpho also advises against the Artemis for people under 22 and for skin types V and VI. The Artemis manual rules out severe acne, and deep or cystic breakouts call for a dermatologist.
Artemis vs LumyHealth: which is better overall?
For most buyers weighing Renpho vs LumyHealth, the Renpho Artemis is the better value. It costs $139 less, its model is listed in an FDA clearance, its sessions are shorter, and its warranty runs six months longer. For more masks at this price, see our best budget LED face masks.
The LumyHealth 4D is the better pick when your neck matters, or when you want more light modes and a wireless remote. It is the lowest-priced face and neck set among the masks we compared in our best LED face masks guide. Either way, you get a comfortable silicone mask with the red and near-infrared light that the research supports best.
Artemis vs LumyHealth FAQ
Is the Renpho Artemis better than the LumyHealth 4D?
For most first-time buyers, yes. At $159.99 against $299, the Renpho Artemis is cheaper, needs only 10 minutes a session, and its model appears in FDA clearance K243555. The LumyHealth 4D is the better fit if you want a neck mask and nine light modes.
Is the Renpho Artemis FDA approved?
No, because home LED masks go through 510(k) clearance rather than approval. The Artemis sold in the US is model E100B, one of ten models in K243555, a 2025 clearance covering full-face wrinkles (red plus infrared) and mild to moderate inflammatory acne (blue and mixed light).
Is the LumyHealth 4D FDA cleared?
Not that we could find: FDA records showed no 510(k) under the Lumy or LumyHealth names. Lumyhealth calls the mask FDA-registered, which tells the FDA where a device is made but is not a clearance. Ask Lumyhealth for the details.
Does the Renpho Artemis cover the neck?
No. The Renpho Artemis covers the face down to the chin. The LumyHealth 4D includes a separate neck mask that wraps under the jaw.
Which LED mask has the better return policy?
It depends on how you shop. Renpho charges no restocking fee, but a change-of-mind return must be unused and sent within 30 days of delivery. Lumyhealth gives you 60 days and takes opened masks, with a 10% to 20% restocking fee plus return shipping.
How long until the Artemis or LumyHealth 4D shows results?
Plan on 8 to 12 weeks of regular sessions with either one. The 2025 home-mask trial that used 630 and 850 nm light first measured a difference from sham at week 8.
Sources
- FDA 510(k) K243555: LED light therapy mask models including E100B, Shenzhen Eyco Technology (decision February 5, 2025) and its 510(k) summary (PDF)
- FDA: Device Registration and Listing (what registration covers)
- openFDA 510(k) and registration searches for Lumy and LumyHealth (October 19, 2026)
- Park et al., Medicine, 2025: double-blind, sham-controlled trial of a home 630/850 nm LED mask for crow's feet
- Scott et al., Annals of Family Medicine, 2019: blue-light therapy for acne, systematic review
Show 7 more sources
- Ngoc et al., Photodermatol Photoimmunol Photomed, 2023: LEDs for skin therapy, systematic review and meta-analysis
- Stirling and Haslam, J Cosmet Laser Ther, 2007: placebo-controlled trial of 1072 nm light around the eyes
- Renpho: Artemis LED Light Therapy Mask product page (price and specs checked October 19, 2026) and E100B user manual (PDF)
- Renpho policies: returns and refunds, limited warranty, shipping
- Lumyhealth: LumyHealth 4D Rejuvenating Face & Neck Mask product page (price and specs checked October 19, 2026)
- Lumyhealth policies: refund policy, warranty, shipping, HSA/FSA
- Companies House: Lumy Health Ltd, company 17231974